Archive for August, 2018

DEVIL’S ISLAND: Matt Sharp’s chopped, channelled and sectioned Model-A Ford Tudor


14 Aug

Matthew Sharp's 1930 Model-A Ford

DEVIL’S ISLAND

Devil’s member Matt Sharp’s bitchin’ chopped, channelled and sectioned ode to the heyday of hot rodding leaves us all hot and flustered
Words & Pics by: www.hoskingindustries.com.au

Matthew Sharp's 1930 Model-A FordThere’s little dispute that hot rodding’s heyday took place in the decades of the 1950s and ’60s. Most of the important innovations we still rely on today were developed in these years by ingenious and often crazy fabricators here and in the USA.

Names like Roth, Barris, Jon Kosmoski, Gene Winfield and so many more forged the way for builders at all levels to tinker with their tin in sheds all over the world, setting a pretty clear stylistic path while they were at it. While styles changed over the ensuing decades, the new millennium has seen a distinct shift back to the aesthetic ideals of the early days and 29-year-old Matthew Sharp’s 1930 Model A tudor is an excellent case in point.

Looking like something from a 1964 issue of Car Craft, this HOK Tangerine candy metal flake sled may look like some serious coin has been lavished on it, but it actually started as a budget build. “It started as a budget build and it stayed that way,” Matt says. “We built it to drive and have fun in.”Matthew Sharp's 1930 Model-A Ford

While you’d never know it now, the project actually began with a dented and damaged steel 1930 tudor body and rails. The car still retains both today. “The sides were pushed in, the doors were rough but it was a cheap start,” Matt says.

Having previously built a Commodore ute “with all the usual bling” and tinkering with jacked up 4X4s, this build was to be Matt’s first foray into rodding. Luckily for Matt, he had some exceptional assistance in the form of his father-in-law, the inimitable Tony Webster from Webby’s Speed Shop in Carrington, Newcastle NSW.

What you’re looking at now is actually the second iteration of the project, with the first being decidedly more ‘rat’. With the ethos of having fun and doing it cheaply, the undercoat and rust aesthetic worked perfectly for Matt, who drove the chopped and channelled tudor for a few years before hauling it off the road for a quick respray. “When we first finished it, we drove it from Newcastle to Philip Island via the Princess Highway for the Kustom Nationals, then drove it home again,” Matt says. “We started off pretty tentatively, but after we got past Sydney it was pretty relaxing. We figured if anything was going to go wrong, it would have happened by then.”

Matthew Sharp's 1930 Model-A FordRiding on the car’s original rails, the Model A is snake-belly low thanks to the 5in chop and 5in channel job. The car uses a classic combination of parts to achieve the desired results, like the torsion bar suspension, super tall 16in Firestone white walls and super furry, stark white faux fur trim. However, the driveline is a little different, using a Holden V8 with triple Strombergs in place of the usual small-block Chev’. This is then backed up by a T5 5-speed manual.

No matter where you look on Matt’s tudor, you’ll be greeted by a large amount of cool detail. Peek inside and check out that awesome instrument cluster housed within the headlight bucket or perhaps the cabin-mounted Moon fuel tank from the 1950s. Outside, dig on the cool recessed tail lights or the centrally-located exhaust pipes exiting through the lower part of the cabin behind the number plate. If that wasn’t enough, you gotta love the Mooneyes logos plasma cut into the sun visor or the beer bottle top pressed into the radiator grille. And you can miss all the excellent pin striping courtesy Smith Concepts.Matthew Sharp's 1930 Model-A Ford

“You know, I think if I were to do it all over again, I’d probably not repaint it like I did,” Matt says. “I had more fun in it when it was still a rat.”

As it is, Matt is looking to sell the tudor on to new owners for less than you could build it for yourself. He tells us it’s time to pay some money of the house and start work on a new project; no doubt with the help of Webby and the rest of his Devils club mates. We can’t wait to see it!

NOTE: If you think Matt’s Model-A looks familiar, it’s because it was later sold to Kyle at Smith Concepts, who turned it into this CLICK HERE

VEHICLE: 1930 Model A Ford
OWNER: Matthew Sharp
BODY: Steel tudor body, 5in chop, 5in channel, frenched tail lights, custom tonneau roof, plasma-cut Mooneyes motif in visor, House of Kolor Tangerine candy over metal flake
ENGINE: 308ci Holden V8, stock crank, stock rods, ACL 40-thou’ pistons, cast heads, Chev’ LT1 springs, Crane hydraulic cam’, high-volume oil pump, shortened Model A radiator, 3x Stromberg carbs, custom intake manifold, mechanical fuel pump, genuine 1950s Moon fuel tank, steel fuel lines, custom exhaust
TRANS: T5 5-speed, Exedy heavy-duty single-plate clutch, custom long-arm shifter
DIFF: Borg Warner, 2.89:1 final drive, LSD
INTERIOR: Moon steering wheel, custom bomber front seats, white faux fur trim, 1968 Dodge Phoenix speedo in Diamond T headlight bucket, factory dash, long-arm shifter, white vinyl trim on seats
SUSPENSION: Torsion bar front and rear, hot rod front shocks, spring car rear shocks
BRAKES: Commodore front discs, Falcon rear discs
WHEELS: 16in steel rims, Firestone white walls
THANKS TO: Webby’s Speed Shop, Hamilton Chrome, Tidy Trim, Joel Butcher, Shlong, Corey, Tony Bidner, my wife Nicole and her mum Sharyn, Smith Kustoms for the pin striping and Webby for everything

LIVE GALLERY: Polaris @ The Cambridge Hotel, Newcastle – July 21, 2018


07 Aug

POLARIS LIVE AT THE CAMBRIDGE HOTEL – JULY 21, 2018
(Originally published on Lifemusicmedia.com)

CLICK FOR FULL IMAGE GALLERY

I pity any metal head in the hunter region that missed out on tonight’s show at the Cambridge Hotel. Between the four acts on show, just about any genre-loyal fanatic would have been well catered to.

While the overarching theme of the night was of a decidedly modern take on the style, from opener Junkhead‘s spasmodic Dillinger-esque riffage and Diamond Construct‘s more progressive tendencies (these guys have really matured and improved over the last few years), you’d have been smiling from ear to ear by the half way point.

By the time Sydney band Justice for the Damned took to the stage, the Cambo was completely full with an obviously friendly crowd and the five-piece wasted no time in laying waste to each and every one of them. Despite the toy dinosaurs on the stage and some members looking decidedly ‘late ’80s thrash’ in white high-tops and tucked in tees, Justice for the Damned’s blend of ridiculously heavy down-tuned grooving riffs, mixed with equal parts death and hardcore means that while they may not take themselves too seriously, their tunes aren’t to be messed with.

By the time Polaris take to the stage, the audience one big sweaty mess – despite it only being about three degrees outside. One punter has even managed to dislocate his knee in the pit – his only consolation being granted the ability to watch the remainder of the set from side stage.

For the uninformed, Sydney’s Polaris are a highly polished, modern, crushing blend of metal styles, from metalcore to deathcore with hints of progressive elements thrown in for good measure. The band’s mix of growls, screams and clean vocals really adds to the dynamic.

Bodies start falling over the barrier right from the start of the set and continue throughout the show – and anyone not breathless from the full body contact is singing every word at the top of their lungs. It’s really inspiring to see such support and enthusiasm for local music. I’ve born witness to plenty of international touring acts fail to fill the Cambo main room like this.

It was a truly amazing night of Aussie metal.

CLICK FOR FULL IMAGE GALLERY

COVER BIKE: Smith Concepts’ Bagged and Blown Harley Davidson VROD


01 Aug

I had the pleasure of photographing the latest creation from Smith Concepts late in 2017: Australia’s wildest Harley Davidson VROD. Stretched 2in, raked, bagged, blown and gassed… it’s got everything – including over 40k of custom, one-off billet alloy parts! That’s not to mention the amazing custom paint work by Kyle Smith.

BUY A SHIRT, PRINT AND MORE!

As always, we’ve got a series of FREE desktop wallpaper images for you to enjoy. Simply CLICK HERE or on the thumbnails below to visit our Flickr page where all the goodies lay in wait for your visit.

Smith Concepts' Harley Davidson VROD

Smith Concepts' Harley Davidson VROD

Smith Concepts' Harley Davidson VROD