Posts Tagged ‘kustom’

DEVIL’S ISLAND: Matt Sharp’s chopped, channelled and sectioned Model-A Ford Tudor


14 Aug

Matthew Sharp's 1930 Model-A Ford

DEVIL’S ISLAND

Devil’s member Matt Sharp’s bitchin’ chopped, channelled and sectioned ode to the heyday of hot rodding leaves us all hot and flustered
Words & Pics by: www.hoskingindustries.com.au

Matthew Sharp's 1930 Model-A FordThere’s little dispute that hot rodding’s heyday took place in the decades of the 1950s and ’60s. Most of the important innovations we still rely on today were developed in these years by ingenious and often crazy fabricators here and in the USA.

Names like Roth, Barris, Jon Kosmoski, Gene Winfield and so many more forged the way for builders at all levels to tinker with their tin in sheds all over the world, setting a pretty clear stylistic path while they were at it. While styles changed over the ensuing decades, the new millennium has seen a distinct shift back to the aesthetic ideals of the early days and 29-year-old Matthew Sharp’s 1930 Model A tudor is an excellent case in point.

Looking like something from a 1964 issue of Car Craft, this HOK Tangerine candy metal flake sled may look like some serious coin has been lavished on it, but it actually started as a budget build. “It started as a budget build and it stayed that way,” Matt says. “We built it to drive and have fun in.”Matthew Sharp's 1930 Model-A Ford

While you’d never know it now, the project actually began with a dented and damaged steel 1930 tudor body and rails. The car still retains both today. “The sides were pushed in, the doors were rough but it was a cheap start,” Matt says.

Having previously built a Commodore ute “with all the usual bling” and tinkering with jacked up 4X4s, this build was to be Matt’s first foray into rodding. Luckily for Matt, he had some exceptional assistance in the form of his father-in-law, the inimitable Tony Webster from Webby’s Speed Shop in Carrington, Newcastle NSW.

What you’re looking at now is actually the second iteration of the project, with the first being decidedly more ‘rat’. With the ethos of having fun and doing it cheaply, the undercoat and rust aesthetic worked perfectly for Matt, who drove the chopped and channelled tudor for a few years before hauling it off the road for a quick respray. “When we first finished it, we drove it from Newcastle to Philip Island via the Princess Highway for the Kustom Nationals, then drove it home again,” Matt says. “We started off pretty tentatively, but after we got past Sydney it was pretty relaxing. We figured if anything was going to go wrong, it would have happened by then.”

Matthew Sharp's 1930 Model-A FordRiding on the car’s original rails, the Model A is snake-belly low thanks to the 5in chop and 5in channel job. The car uses a classic combination of parts to achieve the desired results, like the torsion bar suspension, super tall 16in Firestone white walls and super furry, stark white faux fur trim. However, the driveline is a little different, using a Holden V8 with triple Strombergs in place of the usual small-block Chev’. This is then backed up by a T5 5-speed manual.

No matter where you look on Matt’s tudor, you’ll be greeted by a large amount of cool detail. Peek inside and check out that awesome instrument cluster housed within the headlight bucket or perhaps the cabin-mounted Moon fuel tank from the 1950s. Outside, dig on the cool recessed tail lights or the centrally-located exhaust pipes exiting through the lower part of the cabin behind the number plate. If that wasn’t enough, you gotta love the Mooneyes logos plasma cut into the sun visor or the beer bottle top pressed into the radiator grille. And you can miss all the excellent pin striping courtesy Smith Concepts.Matthew Sharp's 1930 Model-A Ford

“You know, I think if I were to do it all over again, I’d probably not repaint it like I did,” Matt says. “I had more fun in it when it was still a rat.”

As it is, Matt is looking to sell the tudor on to new owners for less than you could build it for yourself. He tells us it’s time to pay some money of the house and start work on a new project; no doubt with the help of Webby and the rest of his Devils club mates. We can’t wait to see it!

NOTE: If you think Matt’s Model-A looks familiar, it’s because it was later sold to Kyle at Smith Concepts, who turned it into this CLICK HERE

VEHICLE: 1930 Model A Ford
OWNER: Matthew Sharp
BODY: Steel tudor body, 5in chop, 5in channel, frenched tail lights, custom tonneau roof, plasma-cut Mooneyes motif in visor, House of Kolor Tangerine candy over metal flake
ENGINE: 308ci Holden V8, stock crank, stock rods, ACL 40-thou’ pistons, cast heads, Chev’ LT1 springs, Crane hydraulic cam’, high-volume oil pump, shortened Model A radiator, 3x Stromberg carbs, custom intake manifold, mechanical fuel pump, genuine 1950s Moon fuel tank, steel fuel lines, custom exhaust
TRANS: T5 5-speed, Exedy heavy-duty single-plate clutch, custom long-arm shifter
DIFF: Borg Warner, 2.89:1 final drive, LSD
INTERIOR: Moon steering wheel, custom bomber front seats, white faux fur trim, 1968 Dodge Phoenix speedo in Diamond T headlight bucket, factory dash, long-arm shifter, white vinyl trim on seats
SUSPENSION: Torsion bar front and rear, hot rod front shocks, spring car rear shocks
BRAKES: Commodore front discs, Falcon rear discs
WHEELS: 16in steel rims, Firestone white walls
THANKS TO: Webby’s Speed Shop, Hamilton Chrome, Tidy Trim, Joel Butcher, Shlong, Corey, Tony Bidner, my wife Nicole and her mum Sharyn, Smith Kustoms for the pin striping and Webby for everything

RAT CAT: Paul Lonergran’s incredible DIY 327ci Phantom ’28 Dodge


28 Jun

Paul Lonergran's Insane 1928 Dodge Rat Rod

RAT CAT

Paul Lonergran’s incredible 327ci phantom ’28 Dodge is a snake-belly-low rat rod that sets the bench mark for all others to follow – and does it cheap
Words & Pics by: www.hoskingindustries.com.au

Paul Lonergran's Insane 1928 Dodge Rat RodWe’ve run some bloody cool rat rods in our time here at Heavy Duty Hot Rods. Rat rods, when built to their true ethos of remaining cheap, encouraging parts scrounging and making rodding fun and hassle free, can really test a builder’s skills of sourcing and repurposing old bits and pieces into something new and exciting.

Sure, there have been some instances over the last decade of guys building big dollar ‘rats’ with the look of a rat rod, but offering mod-cons. We’ve even seen a fibreglass mid-’30s rod repainted to look like it was rusty. But the best rat rods will always be the ones that have risen from the pile of rusty parts that have been wasting away at the back of the shed.

For 39-year-old Paul Lonegran of PTL Fabrications on the Central Coast of NSW, building a rat rod hadn’t seriously entered his mind until someone planted the seed. “Well, actually a guy called ‘Black Plug’ inspired me to build this,” Paul says. “He asked me at a club meeting if I had anything to do with hot rods. As I’d been around rods all my life and have owned more than 20 cars over the years, I decided to build this to shut him up.”

Having previously owned and built a number of cars including a 1961 Studebaker, ’36 Terraplane and a couple of ’37 Ford coupes, Paul was no stranger to vintage tin. And as you may have guessed from that list, he’s no stranger to old cars that are just a little bit different.Paul Lonergran's Insane 1928 Dodge Rat Rod

This here low-slung rusty bucket definitely falls into the different category. Paul tells us the body – hand fabricated by Paul – is meant to represent a 1929 Dodge. From a few metres back you’d be forgiven for thinking it might actually be some original chopped, channelled and sectioned vintage tin. But get closer and you’ll see the square tube frame underneath onto which Paul bent up the steel body panels before coating them in red oxide primer and scallops.

Behind all the surface rust and corrosion is a plethora of parts from Paul’s apparently extensive collection of goodies that he says he’s had gathering dust for around 18 years. Indeed, when quizzed on the final price of the build project, he smiles and tells us it came to a grand total of $42.

Paul Lonergran's Insane 1928 Dodge Rat RodPaul’s rat is powered by a 327ci small-block that Paul rebuilt himself using the stock crank, Carillo rods and Arias pistons. With a static compression ratio of 11.8:1 when squeezing the AVGAS against the ported cast heads, it’s no slouch, providing 480fwhp to this light weight go-kart.

This is backed by a T350 and HQ Holden Salisbury rear end with steep 4.44:1 gears. We’d be surprised if the rat was ever able to get traction on those old Goodyear stock car slicks with a combo like this.

Look inside and you’ll find the epitome of Spartan cockpits. Considering it’s always open to the weather and the interior of a rat rod, it’s probably for the best. But just look at it: custom buckets fabricated from a 60L drum, rusty custom instrument fascia with vintage gauges and decaying Anglia steering wheel and column.

“Installing that Anglia column and wheel was probably one of the highlights for me,” Paul says. “I used to sit in one and steer it when I was four years old with my grandfather.”

With an insane completed cost of under $50 and a build time of just two weeks, Paul certainly stuck it to old ‘Black Plug’. And with a trophy for Best Rat Rod at the 2010 Taren Point Rat Day as further vindication, who can argue that this is one of the coolest rats you’re likely to find?

VEHICLE: 1928 Dodge (phantom)
OWNER: Paul Lonegran
BODY: Hand-built cab, red oxide primer, pin striping, scallops
ENGINE: 327ci SBC, stock crank, Carillo rods, Arias pistons (11.8:1 compression), Thompson rings, ARP mains studs, ported cast heads, stainless valves, Isky springs, Corvette rocker covers, Offy breathers, Isky solid cam’, solid lifters, chrome moly pushrods, Crow 1.6:1 rockers, Melling oil pump, custom sump, custom pulleys, 1946 International radiator, 850cfm Holley, Holley intake manifold, Bosch coil, modified Chev’ dizzy, Holley fuel pump, Reg Rocket ‘Hillbilly’ headers
PERFORMANCE: 480fwhp
TRANS: T350, 4200rpm stall, manualised
DIFF: HQ Holden Salisbury, 4.44:1 final drive, 1-piece tail shaft, LSD
INTERIOR: 1949 Ford Anglia steering wheel and steering column, custom seats made from 60L drums, custom instrument fascia, vintage gauges
SUSPENSION: “Suicide steer, Ford style”, front transverse leaf spring, Monroe shocks, rear leaf spring
BRAKES: Deleted front brakes, HQ rear drums
WHEELS: 13x5in Holden front steel wheels, custom 15x9in rear steel wheels, Goodyear Stock Car Special rear tyres
THANKS TO: Shacko

CLOCKWORK ORANGE: Simon Grima’s Phantom FE Holden Ute


28 Jun

Simon Grima's FE Holden

CLOCKWORK ORANGE

Simon Grima created this incredible one-off ute from a $500 sedan shell and 20 years worth of spare parts
Story and Pics by hoskingindustries.com.au

Simon Grima's FE HoldenSimon Grima’s 1956 Holden FE phantom ute is proof that you don’t need to spend the earth to take home trophies. This Vermillion Fire two-door has won over 25 awards since he finished the build back in 2006; including five People’s Choice awards. He also took out the top gong at the very first ute muster he attended in 2010.

Yet for all the plaudits and praise, Simon has only spent around $25,000 bringing what was once a $500 wreck back from the brink.

“The vehicle was purchased off a customer that wanted it out of his shed,” starts the 39-year-old mechanic and proprietor of Bonnyrigg Tyres & Mechanical in Sydney’s southwest. “It was just a sedan shell with enough parts to build two cars, including a HR front end. I paid $500 for the lot.”

The enormous pile of parts joined Simon’s existing enormous pile of parts for a few years until the creative bug hit. “One day I decided the shell would make a great learning project to practice MIG welding,” explains Simon.  “So, I started to build a ute out of the sedan shell, knowing it would give me a challenge with no intention of building a real car out of it.”Simon Grima's FE Holden

Using only a tape measure and a ‘good eye’, Simon went about cutting and shutting bits and pieces of the panel work. After a few weeks Simon thought the project was really starting to take shape, but his welding hadn’t improved. “I spoke to a real welder at one point who told me that because I was welding outside, my MIG shield gas was being blown away causing messy welds,” Simon remembers. “So I built a shed and the welding started to get better.”

It was at around the same time that Simon’s mates started suggesting that his go-nowhere welding project could in fact make a pretty good work truck. “Before I made the decision to get too deeply into making the FE a real car, I approached an engineer,” says Simon. “He said it wasn’t a problem if I stuck to his instructions – which were contained within a 30-page report and a bill for $2000!”

Simon Grima's FE HoldenWith a new goal in his sights, Simon set to work more seriously on the FE and work progressed steadily. “When my mates used to come over my wife would tell them that I was in the shed with my second wife. That’s how much time I used to spend on it,” exclaims Simon. “Whenever anyone would ask me when it would be finished, I’d tell them Christmas. They’d always ask which Christmas! To everyone else it was a nightmare project and I wanted to do everything myself.”

Indeed, Simon did prove himself a very capable and handy guy to have in the shed over the course of the FE’s build. Not only did he perform much of the body fabrication (helped by paint and panel guy Jason Dean), but he also built pretty much everything else as well. This included the chassis mods and fitting the injected 5L.Simon Grima's FE Holden

Originally from an HSV SV89, Simon sourced the engine from eBay with 180,000kms on the clock. It sits within the tight little engine bay thanks to Simon’s handiwork fabricating engine mounts, steering rack mounts, cross member modifications and building a custom sump from three other pans. “I used a dummy 308ci block during the construction process,” says Simon. “I used a VH Commodore rack that’s rear mounted. It needed very little modification to work properly.”

The 304ci injected motor copped minor performance mods in the form of a Crane 286 cam’, ported throttle and Chip Torque MEMCAL and it’s backed up by a VP T700 auto’ that’s been fettled with a stage-2 kit and B&M 2500rpm stall. Being a custom install, the tail shaft came in for some modification and it feeds torque into a 100mm narrowed VN diff’ that still uses its 3.08:1 gearing.

Simon’s FE sits nice and low, achieved through the use of the HR front end that came with the original mountain of parts. Up front you’ll find the setup completed by King springs and Monroe shocks while out back the leaf sprung rear has been modified by reversing them and removing a leaf. Simon made up custom coil-overs by using modified Nissan Pulsar struts and front HQ shocks. He also strengthened the chassis to cope with the weight and power of the V8, at the same time rigging up some larger tubs that now house 17x8in VX SS alloys.

Simon Grima's FE HoldenIngenuity and resourcefulness are themes that run through this entire build and you’ll find more of it inside where Simon has used a plethora of factory parts and some creative vision to build a sweet interior. VQ Statesman leather buckets provide the seating while he steers with a HZ Monaro tiller. Fresh grey carpets and velour roof linings complete the look, together with a neat custom centre console trimmed in matching grey leather and featuring a few VX Commodore parts like the shifter surround.

“On its maiden voyage to the 2006 All Holden Day the ute was suffering a major fuel problem,” Simon remembers. “Upon further investigation we found that a wasp had decided to make my fuel tank home while it was in storage. So, after putting fuel in the tank and making mud of its nest and eggs, the filter clogged and staved the car for fuel. The car survived and I even won a trophy!”

Simon is right to be proud of his FE. It has been a huge undertaking that he’s completed with primarily second hand parts and stuff he’s had lying around from decades of collecting bits – not to mention all the work he completed with his own two hands. “The only things that were redone were the chrome work, door trims and roof lining,” confirms Simon. “I tried to recycle everything. I suppose that makes it environmentally friendly – recycling old parts.”

Owner: Simon Grima
Model: 1956 Holden FE
Colour: Ford Vermillion Fire
Bodywork: Phantom ute style
Engine Type: SV89 304ci 5L
Engine Mods: Crane H286 hydraulic cam’, Crow timing chain, custom modified sump, Chip Torque MEMCAL, VT engine covers, JP oil pump, twin thermo fans, ported and polished throttle, pod filter, ported and polished intake, alloy radiator, Bosch external fuel pump, modified Triumph PI fuel tank (behind seats)
Power: 200fwkW (268hp) claimed
Exhaust: VR Commodore cast exhaust manifolds, twin 2in mild steel system, twin cats, 2x high-flow mufflers
Gearbox: T700, B&M 2500rpm stall, stage-2 kit, modified tail shaft
Diff: Modified VN Commodore, 3.08:1 final drive
Brakes: HZ front calipers, VN rear calipers
Suspension: HR front end w/King springs and Monroe shocks, Modified rear leaf springs, custom rear coil-overs, VH Commodore steering rack, chassis strengthening
Wheels/Tyres: 17x8in VX SS rims
Interior: HZ Monaro steering wheel, VQ Statesman seats, custom centre console, Smiths gauges, grey carpets
Other Mods: Relocated battery, 100mm widened wheel tubs
Stereo: Sony head unit, DVD screen
Build Period: 7 years
Cost: $25,000
Thanks: Bonnyrigg Tyres and Mechanical, Jason Dean (paint and panel), Turbo Exhaust Systems, ACA Transmission Services, Hi-Torque Trucks, Bosnjak Engineering

SO COOL: Leon Julien’s DIY Kustom FC Holden Wagon


12 Jun

Leon Julien's 1959 FC Holden Wagon

SO COOL

There are FC Holdens and then there is Leon Julien’s FC wagon. Built under a 3x6m marquee, this blown six retro rocket is a total winner
Words & Pics by: www.hoskingindustries.com.au

Leon Julien's 1959 FC Holden WagonWe’ve featured the gamut of custom cars in our time: from high dollar workshop builds with no interesting back story attached, right through to some of the most bare-bones, DIY, budget builds with stories of heroic feats of self-taught snapper twirling the world has ever known and everything in between. Then there’s 37-year-old Leon Julien and his FC wagon known as FCCOOL.

“I’ve had an interest in FC Holdens since I was about six years old,” Leon says. “My uncle had a van that he ended up rebuilding. But it wasn’t until year seven in high school that I travelled over night from Sydney to Grafton in that van that I made it a life goal to build my own FC and do the same trip.”

By rights, we should not be drooling over Leon’s retro-chic FC, but instead looking on lovingly at an FE sedan. “I only bought the FC wagon as a parts car for the FE I was building,” Leon says. “But when I got it, I realised it still had nine months rego on it, so I drove it for those nine months and became attached to it.”

This was way back in 1995, when grunge was still going about its business of killing hair metal and the country was emerging from the ‘recession we had to have’. With the decision made to swap trajectories and rebuild the wagon, the dash and the engine block from the FE sedan were swapped over to the FC, but it can’t have been much to look at at the time.Leon Julien's 1959 FC Holden Wagon

“It had house paint covering any repairs when I got it,” Leon says. “There were undressed welds, dents whacked out with a hammer and mould on the roof and bonnet, but it had a good running grey motor and three-on-the-tree.”

This is where the story starts becoming truly remarkable. Without the aid of even the most rudimentary single-car garage to work in, Leon resorted to performing the bulk of the work on the car under the meagre shelter of a 6x3m marquee!

Over time, Leon restored the existing metal work and significantly altered it along the way. Look closely, past the more obvious custom grille (featuring door knobs as depicted in a ‘how-to’ article from 1963) and slanted 1953 Edsel head light mods, to the shaved handles and side chrome, frenched tail lights and aerial holes, front indicators, EK tail gate, radiused door openings and bonnet treatment. Leon’s FC is a smorgasbord of tasty metal mods that’ll have you gawking for hours – all performed in the front yard!

“One of my favourite moments during the build would have been the morning after I put the final coats of paint on,” Leon says. “I was pulling all-nighters in the driveway, watching the sun rise as I put parts back on the car while neighbours peered through their blinds, thinking I was nuts.”

Leon Julien's 1959 FC Holden WagonLeon’s retro-rific rig isn’t all about the bodywork, though – as impressive it is that he could pull off such a good job in the front yard. The FC also boasts a tough little Holden six.

Built around the 179ci that Leon originally had in his FE, Westend Performance built him up a nice 208ci stroker using 3.3L rotating parts, held together with ARP studs and fasteners. The cast head was ported and treated to a meaty solid valvetrain, helping the breathing even further. If that weren’t enough, Leon went about fabricating a trick blower setup using a Commodore-spec’ Eaton M90 supercharger that he’s got rigged up to run 8psi.

This combo is backed by a Trimatic and an old Banjo rear end that’s holding up to the punishment so far. “I’ve been running this engine block since 1994 and have given it a good workout in that time,” he says. “I don’t really understand why people always say these things are weak.”

“I built this car for the odd trip down the drag strip, carting the family on long distance trips to car shows and cruising around town,” he says. “It goes like the clappers, drives quite smoothly, doesn’t use a lot of fuel and has pretty good throttle response. I love that it also seems to get more attention than a lot of other high-dollar builds.”

With a slew of trophies under its belt already and with the Julien clan attending plenty of shows up and down the east coast, the FC is sure to continue winning fans the more it’s seen. However, it’s unlikely to look the same each time you see it, with Leon continually working to improve the package.

All hail the DIY king!

VEHICLE: 1959 FC Holden
OWNER: Leon Julien
BODY: White/blue two tone (high opacity white, tinted with green/blue tinter under white pearl), custom grille, frenched tail lights, all seams welded, EK tail gate, door corners radiused, guards welded to body, shaved handles, side trim shaved, twin frenched aerial holes, hood corners radiused, frenched indicators, canted 1958 Edsel headlights
ENGINE: 1964 179ci Holden six (stroked to 208ci), block decked and O-ringed, Holden black 3.3L crank, 3.3L rods, ACL Race Series pistons, ARP mains stud kit, ACL bearings, ported cast head, copper head gasket, Camtech solid cam’, Yella Terra 1.5:1 rockers, Manley pushrods, straight-cut gear drive, JP high-volume oil pump, EH sump, 2x 14in thermo fans, HQ V8 radiator, 85A alternator, Ross balancer, custom blower pulley, modified HS8 SU carb’, Eaton M90 supercharger (8psi), regraphed Bosch VK Commodore electronic distributor, Crane Cams LX92 coil, Crane Hi6 TRC-2 w/map sensor, custom wiring harness, Mallory Comp 140 fuel pump, Mallory billet FPR, 6-2-1 headers, 2.75in mild steel exhaust, H&M muffler
TRANS: Trimatic, 2800rpm stall, modified valve body
DIFF: Banjo, 2.78:1 final drive, LX Torana tail shaft
INTERIOR: Repainted EH Holden steering wheel, custom plush pile carpets, white vinyl roof lining, chromed instrument cluster fascia and glove box, NOS 1960’s Stewart Warner gauges, JVC head unit, Rockford Fosgate power amp’, Cerwin Vega front speakers, Diamond Audio rear speakers, Sony 6x9in behind factory dash grille, Dynamat Extreme sound deadener
SUSPENSION: HR Holden front, Pedders front springs, Gabriel shocks, reset rear leaf springs, adjustable Gabriel rear shocks, on-board compressor and control solenoids for rear, HR Holden steering arms, EH Holden steering column, 50x50mm box from sub frame to leaf spring hangers
BRAKES: HR Holden front discs, HR rear drums, Bendix pads and shoes, VH40 booster, braided lines
WHEELS: Stock 13in steel rims
THANKS TO: West End Performance, Active Transmissions, Motorsport Connections, Better Brakes – Blacktown, American Autos, FC/FC Holden forum, GMH Torana forum, OzRodders forum

HEIRLOOM: Dave Kracht’s Lexus-Powered 1940 Ford Sloper


30 May

Dave Kracht's 1940 Ford Sloper

HEIRLOOM

Dave Kracht’s 1940 Sloper has been in the family since 1964 and it’s never looked better
Words and Pics: www.hoskingindustries.com.au

Dave Kracht's 1940 Ford Sloper“The car was originally bought and built by my dad in 1964,” starts Dave Kracht, the current ‘custodian’ of this immaculate and understated Aussie 1940 Ford Sloper Deluxe. “He was a member of the Romans Hot Rod Club.”

Incredibly, the Ford has never left the Kracht family in all those years. Thanks to a seven year rebuild completed in 2009 the car has a new lease on life that will see it cruising our nation’s roads for plenty more.

“The car was in many shows in the 1960s and won many awards,” Dave says. “In 1968 dad ‘finished’ it and it won Top Tudor at the Sydney State Titles show at Roselands.”

In around 1971 Kracht senior pulled the car apart to give it a new drive train, but Dave says he lost interest in the ’40 and it sat dormant until the late 1980s when Dave took over. “I had it in various guises over the years,” Dave explains. “The last iteration saw it painted black with flames and a sidevalve V8, Halibrand diff’ and white walls on steelies.”Dave Kracht's 1940 Ford Sloper

Fast forward to 2002 and Dave embarked upon the car’s most extensive and decidedly tasty rebuild. The project would take seven years and see just about every nut, bolt and component replaced or refinished.

“Most of the rebuild took place in Ralph Stapley’s workshop in Bathurst,” Dave says. “Ralph was a good friend of my dad’s and a fellow Romans member.”

Dave says the object of the build was to create a rod that was a good driver “that you could drive interstate with ease and comfort”. I think you’ll agree with Dave when he says that objective was completed.

“It took a lot more work and time that we expected,” Dave admits. “That included a lot of bodywork to get a good fit and finish.”

Dave Kracht's 1940 Ford SloperFellow Bathurst local Ray Tobin took care of the bulk of the body work, with the Lost Green finish applied by The Repair Wizard back in Dave’s home town of Katoomba in NSW’s Blue Mountains. The result is a clean, understated and timeless look complemented by the factory bright work and those sweet Coddington alloys.

Dave’s ’40 isn’t all paint and body though, with the engine and drive train proving just as interesting. When your objective is to create a vehicle capable of easy interstate travel, it’s hard to go past a late-model motor and Dave’s choice of a quad-cam’ Lexus V8 borders on genius.

Not only is the Lexus a refined, robust and downright bullet proof engine, it’s also easy on the juice, comes with air-con and cruise control and makes all the right sounds when coupled with a decent exhaust. The Ford boasts a set of custom 4-into-1 ceramic coated headers and a twin stainless system, making sure this rod sounds like a rod should.Dave Kracht's 1940 Ford Sloper

To keep things simple and reliable, Dave retained the services of the factory 4spd overdrive auto’ gear box, even integrating the original shifter assembly into his incredible interior. Being the proprietor of DNA Motor Trim in Katoomba, Dave was in an excellent position to equip the Ford with a cabin to die for and that’s just what he delivered.

Based around two pairs of AU Falcon bucket seats, Dave created a supremely classy cabin that’s drenched in black leather, with the seats featuring tasteful embossed inserts that are mirrored on the door trims as well. Dave also constructed the full length centre console that includes that factory Dave Kracht's 1940 Ford Slopershifter, the door trims and the entire rear section that includes air vents and hides all the wiring and other ugly stuff.

As nicely as the completed car turned out, it’s the friendships and contact with the scene that proved most rewarding for Dave. “The best part of the build by far was reconnecting with Ralph,” Dave says. “I formed a very strong friendship with him during the project and I have become friends with many people during and after the build.”

Perhaps the sweetest moment of all came during the 2009 Custom Auto Expo state title show when Dave decided to enter the Ford as a kind of ‘completion of the circle’ that his dad started way back in 1968. “It ended up winning the Top Tudor award,” says Dave, still smiling at the memory. “Same car, same show, same award 41 years after it first won. It was a very satisfying moment and I was honoured to win.”

Owner: Dave Kracht
Engine: 1994 Lexus 4L Quad-Cam V8, ceramic-coated 4-into-1 headers, stainless twin exhaust, K&N pod filter, alloy radiator, alloy radiator overflow tank, thermo fan
Power: Untested
Trans: Factory Lexus electronic 4spd auto
Diff: Jaguar IRS, 3.54:1 final drive, LSD
Suspension: Rear coil-overs, fully boxed chassis rails w/tube cross members
Wheels: Coddington Stingray rims (15x6in front, 17x8in rear)
Brakes: XF Falcon front rotors, VS Commodore front calipers, Nissan Skyline rear calipers, in-board rear rotors, booster and master cylinder under-dash
Interior: AU Falcon ute front and rear buckets, black leather trim w/embossed inserts, grey carpets and grey cloth roof lining, Autometer gauges, Lexus shifter, custom centre console, custom roof pod and door trims
Thanks to: DNA Motor Trim, The Repair Wizard – Katoomba, Timic Hot Rod Supplies, Ralph and Annette Stapley, Ray Tobin, my son Kevin and all my friends and family who helped out and continue to do so

Feature Car: Smith Concepts’ Ford Model-A Hotrod


26 Feb

My photo shoot on Kyle Smith’s radical and retro Model-A Ford hotrod for issue nine of Forged magazine was actually the second time I’d photographed the car. The first time I laid eyes on the slammed, chopped and channelled Ford was several years ago when I shot the original iteration of it for another magazine. Once naturally aspirated and chunky metalflake orange, Kyle bought the car and truly made it his own. Issue nine of Forged is still available right now on newsstands nationwide.

BUY A SHIRT, PRINT AND MORE!

As always, we’ve got a series of FREE desktop wallpaper images for you to enjoy. Simply CLICK HERE or on the thumbnails below to visit our Flickr page where all the goodies lay in wait for your visit.

Smith Concepts Ford Model-A Hotrod

Smith Concepts Ford Model-A Hotrod

Smith Concepts Ford Model-A Hotrod

Image Gallery: MotorEx 2013, Sydney


20 Jul

We had the pleasure of getting in to see all the wonderful hot rods, muscle cars, motorcycles and Aussie classics during the pre-show press launch at the Meguiar’s MotorEx yesterday afternoon. This included the press conference with the talented Chip Foose, who is this year’s celebrity attendee.

We stuck around for a few hours and snapped off a stack of shots for anyone unable to get there this year. So without further ado, CLICK HERE or on the thumbnails below to view 111 images from the 2013 MotorEx.

2013 Meguiar's MotorEx

2013 Meguiar's MotorEx     2013 Meguiar's MotorEx

2013 Meguiar's MotorEx     2013 Meguiar's MotorEx

Feature Car: John Trunzo’s FJ Holden Coupe


14 Jun

We recently had the pleasure of photographing this iconic Australian kustom for Cruzin magazine. Rebuilt over four years by John Trunzo, the FJ Holden was originally built by Lance Simmers in the 1960 and won scores of trophies both in car shows and on the drag strip. Today, the car is far beyond what Simmers had done with the car, with flawless burnt orange candy paint covering top and bottom, however the essence of the original car remains.

BUY A PRINT

As always, we bring you six FREE desktop wallpaper version of the images over on our Flickr page. CLICK HERE or on the thumbs below to go get ’em! Lighting fans can also see our lighting information and EXIF data, although the main exterior shots were all natural light in this instance.

John Trunzo FJ Holden Coupe

John Trunzo FJ Holden Coupe     John Trunzo's FJ Holden Coupe

Feature Car: Greg Pennell’s XL Ford Falcon


13 Aug

Issue 17 of Heavy Duty Hot Rods magazine (aka Wild Custom Hot Rods) is due out soon and contains our photo shoot and feature story on Greg Pennell’s awesome XL Ford Falcon kustom sedan, pictured here. If the name sounds familiar, it’s because we’ve also photographed his custom chopper – SEE IT HERE.

Built on the cheap for trouble-free cruising with the family, this XL features a tonne of excellent paint effects all performed by Greg, who now runs his own custom shop on the Central Coast of NSW. It’s powered by the original 250ci straight six and 3-speed auto, but just about everything else has been modified. Be sure to get the full story when the magazine goes on sale.
Buy a print of this car: CLICK HERE

Oh, and if you’re wondering why Greg and his family are cozying up on a picnic blanket in a tunnel… we had a nice plan to shoot in a grassy park, but the dismally wet summer we had saw our shoot day compromised by torrential rain. Still looks cool though, right?

As always. we’ve got some great desktop wallpaper images of the car for you totally FREE and photogs can get the low down on our lighting setup and EXIF data on our Flickr page, too. Just CLICK HERE or on the thumbnails below.

Greg Pennell's XL Ford Falcon

Greg Pennell's XL Ford Falcon     Greg Pennell's XL Ford Falcon

Buy It Now: Prints and Other Fun Stuff Available on RedBubble


03 Aug

As we hurtle toward the 200,000 unique visitor mark here on the website, we’ve been busy uploading tonnes of our images to RedBubble so you can order prints, cards, posters and other things for yourself. RedBubble is a well established online service that offers artists, photographers and anyone else the ability to sell their wares to their customers, with high-quality printing options and dependable delivery.

To ensure we could honestly recommend RedBubble, we recently ordered a selection of their products and they were all of a high standard. Not only that, but the packaging was top notch and the delivery times were fast, too.

We currently have 78 images uploaded from all our favourite automotive photo shoots, with something for everyone, including Holdens, Fords, muscle cars, bikes, trikes, hot rods and kustoms. Please take the time to visit our page by CLICKING HERE or on the image below and seeing for yourself. We’ve got options from just $2.63 for a greeting card through to posters and framed prints, starting at $100.

Visit our RedBubble Page